分类号：无锡职业技术学院毕业设计（论文）题目基于电子技术声光控制照明电路设计与实现英文并列题目Design and implementation of an acousto-optic controllighting circuit based on electronic technology院系物联网学院班级应用电子31601学生姓名孙宇豪学号3080160128指导老师(1)饶成明职称讲师指导老师(2)职称答辩委员会主任主答辩人二零一九年四月无锡职业技术学院毕业设计（论文)说明书目录、绪论31.2项目研究目的及意义…1.2.1项目研究的目的.1.2.2项目研究的意义…51.3.2因外现状…671.5当今市场上声控灯的类型.8二.声光两控灯系统的总体设计…992.1.1声控灯工作原理…92.2.设计内容与要求…三，声光控制照明电路系统的硬件设计与检查，.113.】独立元器件的检查133.2光照检测电路的检测…3.3声音检测电路的检测…133.4声级计的检查维修…14第四章声光控制照明电路系统的电路设计，.151542开关电路….154.3声音控制电路…1644延时电路17五，声光两控系统的软件设计与调试185.】软件设计185.2软件调试…18六总结与致谢6.2致谢20参考文献…20附录…无锡职业技术学院毕业设计（论文)说明书基于电子技术声光控制照明电路设计与实现摘要：声光控制照明电路的设计和应用，有效降低了夜间居民区，工厂等场所的照明功耗。本文探讨了声光控制照明电路设计的意义，研究了基于电子技术的声光控制照明电路的设计思想和电路图，并对电路图中的各种结构进行了说明。最后，本文总结了全文。近些年来，节能减排是中国倡导的发展理念。避免资源浪费不仅是中国各行业企业需要做的工作，也应该在各种生活场景中实施和实施。在过去的阶段，由于夜间灯火通明，中国的学校，工厂，住宅区等地造成了大量的电力损失。虽然手控照明灯的参考有效地降低了夜间照明所使用的功率，但可以肯定。随着科学技术的不断发展，已经开发出一种声光控制照明电路，它突破了传统的照明控制方法，带来了质的飞跃。经过对比，本文选用51单片机平台作为声光控制的核心，控制灯的亮和灭，在传感器的使用方面，使用了声音和光传感器来实现对灯的周围信息来进来采集。经测试，本声光系统能够完成对灯的亮灭进行控制，操作简单，为优化声光系统功能奠定了基础。关键词：声光控制：照明：灯Design and implementation of Acousto-optic Control LightingCircuit based on Electronic TechnologyAbstract The design and application of acousto-optic control lighting circuit effectively reduce the lighting powerconsumption in residential areas,factories and other places at night.In this paper,the general design concept andcircuit diagram of acousto-optic control lighting circuit based on electronic technology are studied from the meaningtrigger of acousto-optic control lighting circuit design,and each structure on the circuit diagram is explained.Finally,the full text is summarized.In recent years,energy conservation and emission reduction is the development conceptadvocated by our country.To avoid the waste of resources is not only the work that needs to be done by the enterprisesin various industries,but also should be implemented and implemented in all kinds of life scenes.In the past,schools,factories,residential areas and other places in our country have always been lit at night.Cause a great loss ofelectricity.The reference of hand-controlled lighting can effectively reduce the electric energy used by night lighting.but it does not change to a certain extent.With the development of science and technology,an acousto-optic controllighting circuit has been developed now.The design of the circuit breaks through the traditional lighting controlmethod and brings a qualitative leap.After comparison,51 single-chip microcomputer platform is chosen as the coreof acousto-optic control.In the aspect of sensor use,sound and light sensors are used to collect the surroundinginformation of the lamp,which is the core of the acousto-optic control.Through the test,the acousto-optic system cancontrol the lighting of the lamp,and the operation is simple,which lays a foundation for the optimization of thefunction of the acousto-optic system.